Description
Explosion Proof motors feature a Totally Enclosed Fan Cooled Explosion Proof (TEXP) enclosure, designed for industrial applications with the presence of highly combustible, pervasive materials.
Features of the XP2-18-145TC Explosion Proof TC-frame Motor
- Meets or exceeds NEMA Premium® Efficiency Requirements defined by NEMA MG-1, Table 12-12
- Class I, Div II Groups ABCD, T2B
- Suitable for wye-delta start on 213T frame and above
- Dual voltage ratings suitable for part wind start on lower voltage
- Single voltage ratings suitable for part wind start at 460V are noted
- 1.15 Service Factor @ 60 hertz; 1.0 Service Factor @ 50 hertz
- Suitable for 575V @ 1.0 Service Factor
- Inverter Duty (20:1 variable torque; 10:1 constant torque)
- Vacuum Pressure Impregnation for all windings
- Sealed bearings thru 215T frame
- Greasable bearings 254T frame and above
- Mechanical “V” Seal on drive end
- Class F insulation system, class B rise at full load
- 40° C ambient continuous duty
- Corrosion resistant paint
- Stainless steel nameplate and zinc plated hardware
- F1/F2 reversible
- Feet are dual drilled on most frames for mounting flexibility
- Cast iron frame construction including the conduit box
- C-Flange and D-Flange field conversion kits available
- Lifting provisions on 143T frame and above
- Condensation drains with plastic plugs
- IP55 Protection – Terminal box is sealed for IP66 protection
- CSA + C + US Certification
- ISO 9001 Certification
SPECIFICATIONS:
- Horsepower: 2HP
- RPM: 1800RPM
- Phase: Three-Phase
- Frequency: 60/50 HZ*
- Voltage: 208-230/460
- Frame Size: 145TC
- Enclosure Type: TEXP
- Degree of Protection: IP55
- Insulation Class: Class F
- Service Factor: 1.15
- FL Efficiency (%): 86.5
-
Full Load Amps: 2
- Approvals: UL Listed Class 1, Div. 1, Groups C and D; Class 2, Div. 1, Groups F and G
- Approximate Weight: 88
CLICK HERE TO VIEW THE PRODUCT SPECIFICATION SHEET 2HP 1800RPM 145TC