Description
Features of the EM40-12-364TC Three Phase TC-frame Motor
- Meets or exceeds NEMA Premium® Efficiency Requirements defined by NEMA MG-1, Table 12-12
- Class I, Div II Groups ABCD, T2B
- Suitable for wye-delta start on 213T frame and above
- Dual voltage ratings suitable for part wind start on lower voltage
- Single voltage ratings suitable for part wind start at 460V are noted
- 1.15 Service Factor @ 60 hertz; 1.0 Service Factor @ 50 hertz
- Suitable for 575V @ 1.0 Service Factor
- Inverter Duty (20:1 variable torque; 10:1 constant torque)
- Vacuum Pressure Impregnation for all windings
- Sealed bearings thru 215T frame
- Greasable bearings 254T frame and above
- Mechanical “V” Seal on drive end
- Class F insulation system, class B rise at full load
- 40° C ambient continuous duty
- Corrosion resistant paint
- Stainless steel nameplate and zinc plated hardware
- F1/F2 reversible
- Feet are dual drilled on most frames for mounting flexibility
- Cast iron frame construction including the conduit box
- C-Flange and D-Flange field conversion kits available
- Lifting provisions on 143T frame and above
- Condensation drains with plastic plugs
- IP55 Protection – Terminal box is sealed for IP66 protection
- CSA + C + US Certification
- ISO 9001 Certification
Product Details:
| Weight | 786 lbs |
|---|---|
| HP |
40 |
| RPM |
1200 |
| Mult. Sym. |
M16 |
| Frame |
364T |
| Volts |
208-230/460 |
| Enclosure |
TEFC |
| F.L. Eff. |
94.1 |
| Notes |
1,2,3,5 |
| "C" Dim. |
33.5 |
| F.L. Amps |
51 |
Direct replacement for Baldor EM4118T-C; Marathon E2105A (364TTFCD6596); LEESON 192070.10 (G143T17FB2086A); U.S. Motors HD40P3E-C; Hyundai HES40-12-364TC; and Toshiba 0406SDSC41A-P — all 40 HP, 1200 RPM, 364TC Frame, 3-Phase TEFC C-Face industrial motors.
This 40 HP 1200 RPM 364TC C-Face motor delivers premium efficiency and inverter-ready performance for conveyors, mixers, and heavy-duty equipment requiring a NEMA 364TC mount and high torque at low speed.
Need More Details?
Email info@electricmotors.com , reach out on LiveChat if a rep is available, or call
(800) 760-2065
Contact our team for expert advice and information on selecting the ideal motor for your specific application.