null

200HP 1800RPM 447T - Three Phase

$9,130.99
(No reviews yet) Write a Review
SKU:
EM200-18-447T
Short Description:
Three Phase T-Frame Motor
Brand:
Electric Motors
Condition:
New
HP:
200
Phase:
Three
RPM:
1800
Frame:
447T
Enclosure:
TEFC

Description

DESCRIPTION: 

Our 3 phase T-frame motors are suitable for all general purpose applications as well as many special purpose applications where heavy duty, all cast iron premium quality motors are required. Our 3-phase T-frame motors feature high starting torques and high break down torques as well as 1.15 service factors for severe applications. Most general purpose T-frame motors are suitable for inverter duty applications as well as operation in both 60Hz and 50Hz applications. All ratings are totally enclosed fan cooled. If you need a reliable well made motor with a iron-clad warranty, this is the motor for you.

Features of the EM200-18-447T Three Phase T-frame Motor

  • Meets or exceeds NEMA Premium® Efficiency Requirements defined by NEMA MG-1, Table 12-12
  • Class I, Div II Groups ABCD, T2B
  • Suitable for wye-delta start on 213T frame and above
  • Dual voltage ratings suitable for part wind start on lower voltage
  • Single voltage ratings suitable for part wind start at 460V are noted
  • 1.15 Service Factor @ 60 hertz; 1.0 Service Factor @ 50 hertz
  • Suitable for 575V @ 1.0 Service Factor
  • Inverter Duty (20:1 variable torque; 10:1 constant torque)
  • Vacuum Pressure Impregnation for all windings
  • Sealed bearings thru 215T frame
  • Greasable bearings 254T frame and above
  • Mechanical “V” Seal on drive end
  • Class F insulation system, class B rise at full load
  • 40° C ambient continuous duty
  • Corrosion resistant paint
  • Stainless steel nameplate and zinc plated hardware
  • F1/F2 reversible
  • Feet are dual drilled on most frames for mounting flexibility
  • Cast iron frame construction including the conduit box
  • C-Flange and D-Flange field conversion kits available
  • Lifting provisions on 143T frame and above
  • Condensation drains with plastic plugs
  • IP55 Protection – Terminal box is sealed for IP66 protection
  • CSA + C + US Certification
  • ISO 9001 Certification

SPECIFICATIONS:

Horsepower: 200HP
RPM: 1800RPM
Phase: Three-Phase
Frequency: 60/50 HZ*
Voltage: 460
Frame Size: 447T
Enclosure Type: TEFC
Degree of Protection: IP55
Service Factor: 1.15 for 40°C / 1.0 for 65°C
Insulation Class: Class F insulation with Class N varnish
FL Efficiency (%): 96.2
Approximate Weight: 1860
Approvals: CSA certified for Class 1, Division 2, Groups A, B, C, D, IEEE-45 Marine Duty Rated

The EM200-18-447T three phase T-frame motor is a direct replacement for:

  • Baldor M3550T
  • Leeson G151698
  • TECO N1/52
  • US Electric ELT32E1D
  • Marathon E833
  • WEG 00156EP3E143T