Features of the EM125-36-405TS Three Phase T-frame Motor
- Meets or exceeds NEMA Premium® Efficiency Requirements defined by NEMA MG-1, Table 12-12
- Rolled Steel Frame on 215T frame and below
- Corrosion resistant paint
- Suitable for wye-delta start on 213T frame and above
- 40° C ambient continuous duty
- Dual voltage ratings 254T and above are suitable for part wind start on lower voltage
- Stainless steel nameplate and zinc plated hardware
- F1/F2 reversible from 254T – 365T and 444T – 449T
- 1.25 Service Factor @ 60 hertz; 1.0 Service Factor @ 50 hertz
- Feet are dual drilled on most frames for mounting flexibility
- Suitable for 575V @ 1.1 Service Factor
- Inverter Duty (20:1 variable torque; 10:1 constant torque)
- Cast iron frame construction on 254T frame and above
- Vacuum Pressure Impregnation for all windings
- Lifting provisions on 182T frame and above
- Sealed bearings thru 215T frame
- IP23 Protection
- Greasable bearings with slinger on 254T frame and above
- CSA + C + US Certification
- Class F insulation system, class B rise at full load
- ISO 9001 Certification
Product Details
| Weight | 1003 lbs |
|---|---|
| HP |
125 |
| RPM |
3600 |
| Frame |
404TS |
| Mult. Sym. |
M3 |
| Volts |
208-230/460 |
| Enclosure |
ODP |
| F.L. Eff. |
94.1 |
| Notes |
1,2,4 |
| "C" Dim. |
30.3 |
| F.L. Amps |
138 |
