100HP 1800RPM 405T-1595590658

$5,696.65
Write a Review
SKU:
EM100-18-405T(R)
Short Description:
100HP 1800RPM 405T
Brand:
Electric Motors
Dimension Drawing:
3-PHASE INDUCTION MOTOR TEFC OUTLINE EM-405T
GTIN:
712478272796
HP:
100
Phase:
Three
RPM:
1800
Technical Specifications:
EM100-18-405T 1 HORSEPOWER 100 2 RPM / POLES 1800/4 3 FRAME 405T 4 ENCLOSURE / DEGREE OF PROTECTION TEFC / IP54 5 VOLTAGE PHASE 230/460V 3 6 FREQUENCY 60Hz 7 RATED SPEED 1790RPM 8 SERVICE FAC
Frame:
405T
Enclosure:
TEFC

Description

Features of the 100HP 1800RPM 405T Rock Crusher Motor

  • Meets or exceeds NEMA Premium® Efficiency Requirements defined by NEMA MG-1, Table 12-12
  • Class I, Div II Groups ABCD, T2B
  • Suitable for wye-delta start on 213T frame and above
  • Dual voltage ratings suitable for part wind start on lower voltage
  • Single voltage ratings suitable for part wind start at 460V are noted
  • 1.15 Service Factor @ 60 hertz; 1.0 Service Factor @ 50 hertz
  • Suitable for 575V @ 1.0 Service Factor
  • Inverter Duty (20:1 variable torque; 10:1 constant torque)
  • Vacuum Pressure Impregnation for all windings
  • Sealed bearings thru 215T frame
  • Mechanical “V” Seal on drive end
  • Class F insulation system, class B rise at full load
  • 40° C ambient continuous duty
  • Corrosion resistant paint
  • Greasable bearings 254T frame and above
  • Stainless steel nameplate and zinc plated hardware
  • F1/F2 reversible
  • Feet are dual drilled on most frames for mounting flexibility
  • Cast iron frame construction including the conduit box
  • C-Flange and D-Flange field conversion kits available
  • Lifting provisions on 143T frame
  • Condensation drains with plastic plugs
  • IP55 Protection – Terminal box is sealed for IP66 protection
  • CSA + C + US Certification
  • ISO 9001 Certification

Product Details

Weight 1172 lbs
HP

100

RPM

1800

Mult. Sym.

M16

Frame

405T

Volts

208-230/460

Enclosure

TEFC

F.L. Eff.

95.4

Notes

1,2,3

"C" Dim.

38.2

F.L. Amps

112